GSF2616
Owner’s Manual
8
Step 3
Align the holes on the top cart R-F(12) with
the holes on the leg R-F(1). Screw a
M6x16mm bolt (A) into a pre-drilled hole.
Align the holes on the top cart R-B (13) with
the holes on the leg R-B (4). Screw a
M6x16mm bolt (A) into a pre-drilled hole.
Align the holes on top cart L-F(10) with the
holes leg L-F(2). Screw a M6x16mm bolt (A)
into a pre-drilled hole.
Align the holes on the top cart L-B (11) with
the holes on leg L-B (3), Screw a M6x16mm
bolt (A) into a pre-drilled hole.
Tighten all bolts by hand until secure.
Go back and tighten by the screwdriver
provided.
Step 4
Align the hole on control panel (14) with a
hole on the top cart R-F(12). Screw a
M6x16mm bolt (A) into a pre-drilled hole.
Align the hole on control panel (14) with a
hole on top cart L-F(10). Screw a M6x16mm
bolt (A) into a pre-drilled hole.
Tighten by hand until secure.
Go back and tighten by the screwdriver
provided.
1
3
0
4
$
