GSF2616
Owner’s Manual
9
Step 5
Align the holes on back beam (16) with the holes
on leg L-B (3). Screw a M6x16mm bolt (A) into
each pre-drilled hole.
Align the holes on back beam (16) with the holes
on leg R-B (4), screwing a M6x16mm bolt (A) into
each pre-drilled hole.
Tighten all bolts by hand until secure.
Go back and tighten by the screwdriver provided.
Step 6
Align the pre-assembled adjustable screw on the left
side shelf (
20
) with the holes on the top cart L-F(10) and
the top cart L-B (11) respectively.
Move the left side shelf to the direction of the narrow end
of the holes on the top cart L-F and top cart L-B.
Tighten the pre-assembled adjustable screw.
Repeat the same procedure for the right side shelf (
19
).
Tighten all bolts by hand until secure.
Go back and tighten by the screwdriver provided
6
$
x4
19
20
