GSF2616
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back check and make certain all the bolts are tighten. Tighten again by the screwdriver provided if it is
necessary.
Estimated Assembly Time: It will takes less than 40 minutes to assembly the grill
Step 2
Align the holes on the right foot (5) with the holes
on the leg R-F(1) and the leg R-B (4) respectively .
Screw a M6x16mm bolt (A) into each pre-drilled
hole and tighten by hand until secure.
Align the holes on the left foot (6) with the holes on
the leg L-F(2) and the leg L-B (3) respectively .
Screw a M6x16mm bolt (A) into each pre-drilled
hole and tighten by hand until secure.
Go back and tighten by the screwdriver provided.
Step 1
Align the holes at the cart front panel (9) with the
holes on the leg R-F (1).
Screw a M6x16mm bolt (A) into each pre-drilled
hole and tighten by hand until secure.
Repeat the procedure for the leg L-F(2).
Go back and tighten by the screwdriver provided.
9
$
x4
$
x4
