GSF2616
Owner’s Manual
10
Step 8
Put grill body assembly (18) upon cart assembly.
Align the holes on both side of grill body with the
holes on both side cart, make certain stainless steel
face panel flat ends fully insert into each hole in the
control panel.
Screw a M6x16mm bolt (A) into each pre-drilled hole.
Tighten by screwdriver until secure.
Tighten the bolts by the screwdriver provided.
Step 7
Insert the axle (8) into the hole of the right
foot.
Put a wheel (7) and a M10 (G) washer on each
end of the axle.
NOTE: protruding side of each wheel must
face the surface of grill leg.
Tighten each axle nut (D) toward the wheel,
make certain each axle nut should be flat
with each end of axle.
18
$
(x4
'
'
G
G
Nut should be flat with end of whee
axle. Do not over tighten the nut.
Protruding side of wheel should face
grill leg.
