- 19 -
Electrode cracked or broken -
sparks at crack
Replace electrode
Burner doesn't light using a
match
No gas flow
Check if propane tank is empty. If
not, refer to Excessive flow
safety valve reset procedure on
page
Coupling nut and regulator are
not fully connected
Turn off coupling nut about
one-half to three quarters
additional turn until solid stop.
Tighten by hand ONLY - DO
NOT use tools
Blockage of gas flow
Check burner tube and hose
Disconnection of burner and
valve
Reconnect
Spider webs or insect nest in
venturi
Clean venturi
Burner ports clogged or blocked
Clean burner ports
Sudden drop in gas flow or
reduced flame height
Out of gas
Replace cylinder
Irregular flame pattern, flame
does not run the full length of
burner
Burner ports are clogged or
blocked.
Clean burner ports
Flames turn yellow or orange
New burner may have residual
manufacturing oils
Burn your grill for 15 minutes with
the lid closed
Spider webs or insect nest in
venturi
Clean venturi
Food residue, grease or
seasoning salt on burner
Clean burner
Poor connection of valve to
burner venturi
Assure burner venturi is properly
connected with valve
Flame blow out
High or gusting winds
Turn front of grill to face wind or
increase flame height
