3
The CyberQ Wi-Fi Contains Transmitter Module FCC ID: W70MRF24WG0MAMB with Radio regulation
certification for United States (FCC), Canada (IC), Europe (ETSI), Korea(KC), and Japan (ARIB) 2.4 GHz, IEEE Std.
802.11b/g™, and Wi-Fi® certified (WFA ID: WFA16869)
The Wi-Fi components in this product have been certified under Wi-Fi 802.11 withWPA2™, and WPA™ System
Interoperability ASD Model Test Plan with Test Engine For IEEE 802.11b and g Devices).
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Other 2.4GHz devices, such as cordless phones and wireless networked devices, may cause interference with the CyberQ Wi-
Fi and prevent a reliable connection. It is the customer’s responsibility to diagnose the source of the interference and
determine which devices need to be turned off or eliminated from the installation.
2. CyberQ Wi-Fi Features
•
Built in Wi-Fi web server allows direct or remote access from your mobile device or PC
•
2.4 GHz, IEEE Std. 802.11g™, Wi-Fi® certified (WFA ID: WFA16869)
•
16 character by two line backlit LCD display
•
Email alert capability
•
Store and switch between hot-spot and infrastructure modes
•
Armored high-temperature pit and food (meat) probes
•
Controls your pit and monitors up to 3 food (meat) temperatures
•
All new full-time adaptive control algorithm learns your pit to provide better stability/accuracy
•
Open lid detect senses when the pit’s lid is open to minimize the temperature disturbance and
recover quickly to the setpoint, can be turned on/off (default is ON)
•
Exclusive ramp down feature (cook and hold) lowers your pit temperature as food temperature
rises, so your food doesn’t overcook
•
Scrolling display shows all of your temps, time, and status
•
Audible alarm sounds on food done (default is ON)
•
Adjustable deviation alarm sounds when your pits temp goes either too high or low
•
Real time blower status indication and output % helps you to estimate fuel use
•
Display in degrees F or C
•
User adjustable number of beeps setting
•
32 to 475° F range with +/- 2° F accuracy
•
Runs on 100-240VAC (for worldwide use) or 12VDC for automotive supply use
