manualshive.com logo in svg

BayTech MRPr, Руководство пользователя

Поделиться
Скачать
BayTech MRPr Скачать руководство пользователя страница 6

 

Page

6 

 

ABOUT THIS OWNER’S MANUAL 

 
 
 
 
 
 
 
 
 

 

 
 
 

 

 
 
 
 

 

 
 
 
 

 

 
 
 
 
 
 
 
 
 

 

 
 
 
 

 

 
 
 
 
 

 

This document provides information required for installing and operating your Bay Tech equipment. It 
should allow the user to connect to, power up, and access an applications menu where peripheral 
equipment can be controlled. We recommend reading this manual carefully, while placing special 
emphasis on correct cabling and configuration. If you have any problems with your installation, please 
contact a BayTech Applications Engineer at 

228-563-7334

, or toll free from anywhere in the United 

States using 

1-800-523-2702 

or contact us at our Web Site, 

www.baytech.net

. 

BayTech manufactures many remote site management power products and data switches. If you would 
like information on any of these products, please contact BayTech Customer Service at the above 
numbers or visit our web site. 

Conventions used in this manual include: 

The information in this document is subject to change without notice. The statements, configurations, 
technical data, and recommendations in this document are believed to be accurate and reliable, but are 
presented without express or implied warranty.  Users must take full responsibility for their applications 
of any products specified in this document. The information in this document is proprietary to Bay 
Technical Associates, Inc. 

In the interest of improving internal design, operational function, and/or reliability, Bay Technical 
Associates, Inc reserves the right to make changes to the products described in this document without 
notice. 

Bay Technical Associates, Inc does not assume any liability that may occur due to the use or application 
of the product(s) or circuit layout(s) described herein. 

CAUTION: 

This term is used to denote any condition that could possibly result in physical harm 

to personnel or damage to equipment. 

ATTENTION:

 Ce terme est employé pour dénoter n'importe quelle condition qui pourrait 

probablement avoir comme conséquence le mal physique au personnel ou les dommages à 
l'équipement. 

 

IMPORTANT: 

This term is used to denote conditions that could result in the loss of 

communications or to highlight the proper functioning of equipment. 

IMPORTANT:

 Ce terme est employé pour dénoter les conditions qui pourraient avoir comme 

conséquence la perte de communications ou accentuer le fonctionnement approprié de 
l'équipement. 

 

NOTE: 

This term is used to denote items of interest to the user. 

NOTE:

 Ce terme est employé pour dénoter des articles d'intérêt à l'utilisateur. 

 
<cr>: 

Carriage Return or ENTER 

<cr>:

 Le Retour chariot ou ENTRE

 

Содержание MRPr
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды