Page
26
Delete
a
User:
Rename
a
User:
Change
Circuit
Group:
Enter user number to rename:
Select R),
changes the name of a user. The unit prompts for the user
number.
Type the number of the user to be renamed, followed by <cr>. The unit
will prompt for the new name:
Once accepted the unit displays the User Menu with new name
Enter user name:
Select D),
deletes a user. The unit will prompt for the user number:
Enter number for user to delete:
Type the number of the user to be deleted, followed by <cr>. The unit will display the User Menu
minus the deleted user.
NOTE:
If an outlet user is deleted and is logged in at the time, the outlet user will be disconnected.
If you delete the user in the first position, the UNIT will display the following:
IMPORTANT:
If the unit has not had a power cycle or unit reset command performed recently,
before you delete the user in the first position, perform a unit reset command from the main menu.
This action will prevent the unit from having
NO Admin
user assigned even though the first position
user was deleted and there is a second user assigned. If the
NO Admin
condition occurs,
reset the
unit to factory defaults
.
--------------------------------------------
| User | Assigned Outlets |
| | C1,1| C1,2| C1,3| C1,4|
--------------------------------------------
--------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
C)...Change Circuit Group
Enter user number to assign Outlets, A, D, C or R.
Enter Request: c
The group is based on outlets to circuit
breaker, i.e. one breaker unit will displays
all outlets. Two breaker units have two
groups of outlets, but will displayed one
group at a time.
--------------------------------------------
| User | Assigned Outlets |
| | C2,1| C2,2| C2,3| C2,4|
--------------------------------------------
--------------------------------------------
Select C),
selects the next outlet group, the
unit displays the following:
You are deleting the current admin user. The next user will become the admin user,
do you want to continue. (Y/N)?
