manualshive.com logo in svg

BayTech MRPr, Руководство пользователя

Поделиться
Скачать
BayTech MRPr Скачать руководство пользователя страница 22

 

Page

22 

OUTLET

 

CONTROLLER

 

STATUS

 

SCREEN

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

 

 

 

 

 

 
 
 
 
 
 

 

MRP-10 Series 
(C) 2008 BayTech 
F1.12 
 
True RMS Voltage 
True RMS Current 

Internal Temperature 

 
Unit ID: MRP-10 
 
Total kW-h: 8731 
------------------------------------------------------------------------------- 
|    Circuit     | True RMS  | Peak RMS  |  True RMS   |   Average  |  Volt-  | 
|     Group      |  Current  |  Current  |   Voltage   |    Power   |  Amps   | 
------------------------------------------------------------------------------- 
|   Circuit M1   |  0.0 Amps |  0.0 Amps | 196.7 Volts |    0 Watts |    4 VA | 
|   Circuit M2   |  0.0 Amps |  0.0 Amps | 200.8 Volts |    0 Watts |    4 VA | 
|   Circuit M3   |  0.0 Amps |  0.0 Amps | 200.3 Volts |    0 Watts |    4 VA | 
|   Circuit M4   |  0.0 Amps |  0.0 Amps | 199.4 Volts |    0 Watts |    4 VA | 
|   Circuit M5   |  0.0 Amps |  0.0 Amps | 198.6 Volts |    0 Watts |    4 VA | 
|   Circuit M6   |  0.0 Amps |  0.0 Amps | 199.6 Volts |    0 Watts |    4 VA | 
------------------------------------------------------------------------------- 
 
Int. Temp: 115.7 F  Ext. 1:  74.7 F : 52.7% RH  Ext. 2:  72.0 F 
 1)...MOD 1 Outlet 1  : On            2)...MOD 1 Outlet 2  : On 
 3)...MOD 1 Outlet 3  : On            4)...MOD 1 Outlet 4  : On 
 5)...MOD 2 Outlet 1  : On            6)...MOD 2 Outlet 2  : On 
 7)...MOD 2 Outlet 3  : On            8)...MOD 2 Outlet 4  : On 
 9)...MOD 3 Outlet 1  : On           10)...MOD 3 Outlet 2  : On 
11)...MOD 3 Outlet 3  : On           12)...MOD 3 Outlet 4  : On 
13)...MOD 4 Outlet 1  : On           14)...MOD 4 Outlet 2  : On 
15)...MOD 4 Outlet 3  : On           16)...MOD 4 Outlet 4  : On 
17)...MOD 5 Outlet 1  : On           18)...MOD 5 Outlet 2  : On 
19)...MOD 5 Outlet 3  : On           20)...MOD 5 Outlet 4  : On 
21)...MOD 6 Outlet 1  : On           22)...MOD 6 Outlet 2  : On 
23)...MOD 6 Outlet 3  : On           24)...MOD 6 Outlet 4  : On 
 
Type Help for a list of commands 
 
MRP-10>

 

Type 

“Help”

 at the prompt to display a list of commands to change the outlet state, outlet 

configuration, and internal sensor measurements. 

NOTE:

 Int. Temp = unit internal temperature. Ext = external temperature probe. Two 

environmental ports are available. Temperature reads in Fahrenheit or Celsius.  
RH = Relative humidity. 

 

NOTE:

 The user will see only those outlets assigned to them by the admin user. 

 
 
NOTE:

 The first three letters in the prompt designate a class of units with a sub-class 

of numbers. Classes = (MDP, MMP, MRP, MSP); i.e. MRP10 is the model number.

 

The Outlet Controller displays the measured circuit True RMS and Peak RMS current values; True RMS 
Voltage; Average Power, Voltage/Amps; Internal and External temperature and Humidity with attached 
probes; along with Open/Close external Switch probes. Also displays the outlet status. At the prompt type 

“Help”

 for outlet command and other menus

.

  

NOTE:

 a 30 minute timer starts when first connected to the Outlet 

‘RC’

 screen. If you need to work 

in the Outlet 

‘RC’

 and the sub-screens for longer than 30 minutes, before the 30 minutes timeout, go 

to the Network menu for 30 seconds then select option-1 from the network menu to return to the 
Outlet ‘RC’ screen. THIS IS CANNOT BE CHANGED. 

Содержание MRPr
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды