manualshive.com logo in svg

Baxi EcoBlue 12 System ErP, Инструкция по установке и обслуживанию

Поделиться
Скачать
Baxi EcoBlue 12 System ErP Скачать руководство пользователя страница 19

7219708 - 01 (04/15)

EcoBlue System

19

Description of the Product

4

4

Description of the Product

4.1

General Description

1. The Baxi EcoBlue System boilers are fully automatic gas fired
wall mounted condensing boilers. They are room sealed and fan
assisted, and will serve central heating and stored domestic hot
water.

2. The boiler is set to give a maximum output of :-

                   12 model -      12 kW

                                         12.7 kW Pnc (Condensing)

                   15 model -      15 kW

                                         15.9 kW Pnc (Condensing)

                   18 model -      18 kW

                                         19 kW Pnc (Condensing)

                   24 model -      24 kW

                                         25.4 kW Pnc (Condensing)

                   28 model -      28 kW

                                         29.6 kW Pnc (Condensing)

                   32 model -      32 kW

                                         33.8 kW Pnc (Condensing)

3. The boiler is factory set for use on Natural Gas (G20).

4. The boiler is suitable for use only on fully pumped sealed
heating systems.

5. The boiler data badge gives details of the model, serial
number and Gas Council number and is situated on the boiler
lower panel. It is visible when the control box is lowered (Fig. 2).

6. The boiler model, serial number and Gas Council number are
also shown on the information label behind the boiler control flap
(Fig. 1). This is for user reference.

7. The boiler is intended to be installed in residential/domestic
environments on a governed meter supply only.

8. The boiler must be installed with one of the purpose designed
flues such as one of the standard horizontal telescopic flue kits
detailed in the Flue Installation Guide .

             
             All systems must be thoroughly cleansed, flushed and 
             treated with inhibitor (see section 5.2.6).

             These Installation & Servicing Instructions MUST be

read in conjunction with the Flue Installation Guide supplied in
the Literature Pack.

             There are a number of dimensional differences between

the 32 model and the lower output versions. These are detailed
in Section 14. Also the position of the expansion vessel differs -
it is at the left on 32, and the flue adaptor on the 32 is offset to
the right when viewed from the front - other models have the
adaptor to the left.

Fig. 1

Fig. 2

Boiler Control
Flap

Information
Label

Data Badge

Control Box
removed for clarity

Содержание EcoBlue 12 System ErP













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды