13. CERAMIC COALS INSTALLATION
1.
Place the ceramic base coal
in the burner compartment.
The bottom rear face of the
coal should rest on the angled
ledges at the back of the
burner compartment. The
bottom front recess edges on
the coal base should locate
against the tags at the front of
the ceramic support (See
figure 27).
2.
Place the ceramic front coal in position in
front of the base coal. The front of the ceramic
coal should touch the front of the burner module
(See figure 28).
The loose ceramic coals are supplied in three
sizes. There are two large ceramic coals, three
medium ceramic coals and 12 small ceramic
coals. When installing the ceramic coals smooth
surfaces should be positioned to the bottom or
rear unless stated otherwise. Install the loose
coals as follows.
Page 25
INSTALLER GUIDE
Figure 28. Front coal location
Figure 27. Ceramic base location
