4. PACK CONTENTS
The items required for this appliance are packed in two sections.
Section 1 - Fire Unit contains:
1
Burner and hotbox unit.
1
Burner front baffle.
1
Nut and olive for 8mm inlet pipe.
1
‘T’ connector and pressure test point.
1
Flue restrictor plate.
2
Screws (For flue restrictor).
2
Screws (For fireback spacing brackets).
2
Screws (For rear ceramic wall support bracket).
1
Ceramic back wall.
1
Pair of ceramic side walls.
1
Left hand front coal.
1
Right hand front coal.
1
Base coal.
1
Pack of loose coals.
2
Small “U” seals for hotbox side flanges.
1
Strip of floor sealing tape.
6
Fibre plugs.
4
Woodscrews.
2
Fire retaining cables.
2
Cable clamps.
4
Eyebolts.
1
Rubber grommet.
1
Smoke match tube.
2
Fireback spacing brackets.
1
Rear ceramic wall support bracket.
1
Length of self adhesive foam seal.
1
Literature pack.
Section 2 - Fire Front contains:
1
Firefront casting.
1
Bottom front cover casting.
1
Fascia pack (Contains three separate pieces and six magnets).
Carefully remove all the contents. Take special care in handling the ceramic walls and the
coals. Check that all the listed parts are present and in good condition.
Page 12
INSTALLER GUIDE
