GS67-1 BLOWER KIT INSTALLATION INSTRUCTIONS
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • (705)721-1212 • fax (705)720-9081 • www.napoleonfireplaces.com
!
WARNING
ENSURE THE UNIT IS COMPLETELY COOL BEFORE STARTING INSTALLATION.
TO AVOID DANGER OF SUFFOCATION KEEP THE PACKAGING BAG AWAY FROM BABIES AND CHILDREN.
DO NOT USE IN CRIBS, BED, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY. KNOT BEFORE
THROWING AWAY.
W415-2205 / 12.02.16
1. Remove the blower knock-out from the rear panel.
(FIGURE 1)
2. Connect the flag connectors and ground wire to blower assembly.
3. Install the blower assembly by using 4 screws (supplied) to secure.
(FIGURE 2)
4. Ensure wires do not interfere with the blower fins or touch the firebox bottom or sides.
BLOWER
ASSEMBLY
GROUND
SCREW
BLOWER
KNOCKOUT
FIGURE 1
FIGURE 2
GREEN
(GROUND)
BLOWER
WIRE
HARNESS
BLACK
TO
IPI
CONTROL
WIRING DIAGRAM
FIGURE 3
