front flanges of the burner. To do this, place the
baffle against the front flanges of the burner and
lower into position. The return edges on the rear
of the baffle should slot over the front flanges of
the burner (See figure 26).
13. FITTING THE CERAMIC FUEL EFFECT
The installer and owner guide for the ceramic fuel effect is supplied with the ceramic
fuel effect. It is important that the fitting guide for the ceramic fuel effect be placed
inside or attached to this guide and handed to the customer following completion of the
‘Final review’ section.
14. FITTING THE FIREFRONT
14.1 Fitting the Blenheim, Bolero, Prelude and
Sonnet firefront.
1.
Place the firefront casting centrally on the hearth
in front of the fascia.
2.
Place the bottom front cover casting in position
below the fire front casting.
14.2 Fitting the Westminster firefront.
1.
The Westminster firefront hooks onto the fascia at
four points. Locate the firefront casting onto the
fascia by locating the upper hooks and lower hooks
as in figure 30.
2.
Locate the lower firefront to the firefront casting
as in figure 30.
Page 31
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 29. Fascia location
Figure 30. Westminster firefront
location.
