4. PACK CONTENTS
The items required for this appliance are packed in two sections.
Remove all the items carefully to prevent damage. Take special care when handling the
ceramic components. Some items may be contained in the packaging fitments -
Examine the packaging carefully before discarding. Check that all the items are present
and undamaged.
Items below with a letter reference are supplied on a film wrapped card.
Section 1 - Fire Unit contains:
(See figure 6).
1 Burner and hotbox unit.
2 ‘A’ Small “U” seals for hotbox side flanges.
9 ‘B’ screws (No. 8 x 10).
2 ‘C’ screws (M4 x 10).
2 ‘D’ washers (For fascia hanging Bolero).
2 ‘E’ screws (M4 x 25) (For fascia hanging on Bolero and Westminster only).
6 ‘F’ Wall fixing plugs.
1 ‘G’ Inlet elbow including pressure test point, nut and olive.
4 ‘H’ Woodscrews
1 ‘K’ Grommet.
2 ‘L’ Cable adjusters.
4 ‘M’ Eyescrews.
1 Burner front baffle (Supplied with all models but required on Blenheim, Bolero,
Camden, Seattle, Prelude, Sonnet and Victorian models only).
1 Flue restrictor plate.
1 Ceramic back wall.
1 Pair of ceramic side walls.
1 Ceramic fuel effect pack.
1 Strip of floor sealing tape.
2 Fire retaining cables.
1 Smoke match tube.
1 Rear ceramic wall support bracket.
1 Length of self adhesive foam seal.
1 Literature pack.
Page 15
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
