Bavaria Yachts BAVARIA 32, Руководство для владельцев и шкиперов

Страница: 26 / 39

Bavaria 32 Bavaria Yacht Bau GmbH
(39)
– 26 –
2.6 L.P.G. installation
The gas installation for the stove meets the European norm EN 10239. The test-certificate is attached.
The gas pipe leading to the stove from the standard 3 kg–gas cylinder is an 8 mm copper pipe. It is placed
into a self-bailing casing moulded into the deck in the rear cockpit area. All gas pipes have been installed
according to the German safety regulations. The best-by date for the soft connection hoses between the
gas cylinder and the copper pipe and between copper pipe and stove is printed onto the hoses. They have
to be replaced after the expiry date.
The reducing valve in the gas cylinder casing has a service pressure of 30 mb. The flow rate is 1 kg/h.
2.6.1 The components
2.6.2 Operation
Gas installations require care. That’s why you should follow this sequence:
Attention:
-
Do not use liquids containing ammonia for checking the pipe.
-
Never handle with open light and do not smoke if you look for leakage
or if you connect a new gas cylinder.
Attention
- Open the stop valve in the gas cylinder casing
- Open the valve before the stove
- Open a stove valve and lighten the gas
- Keep the valve open until the glow timer allows further burning.
Attention
For finishing follow the same (above mentioned) sequence from the
valve in the gas cylinder casing to the stove valve to allow all gas in the
piping to escape and burn.