Bavaria Yachts BAVARIA 32, Руководство для владельцев и шкиперов

Страница: 13 / 39

Bavaria 32 Bavaria Yacht Bau GmbH
(39)
– 13 –
1.3 Drive systems
1.3.1 Sails
The SY Bavaria 32 is equipped with the following standard sails:
Main sail - standard
abt 24,20 sqm
Main sail - fully-battened abt 24,20 sqm
Main sail “ - mast reefing gear abt 21,00 sqm
Furling Genoa abt 24,60 sqm
1.3.2 Rigging
Mast length: 12525 mm; Length of boom: 4250 mm; Length of spreaders: 755 mm/ 1105 mm
Mast
-
LM- Profile, without taper; – 18 deg. double spreaders , angular; - 2 halyards, topping- and boom
lifts,
-
tipping line and fittings.
Boom
-
LM-Profile; - clew outhaul; - 2 reefing lines; - eye for mainsheet; - eye for tipping line.
Standing rigging ( made of 1x19–lace, material 4401), consisting of:
forestay with excessive footage (headsail reef system)
1x
intermediate shroud 2x permanent backstay 1x
lower shroud 2x permanent backstay –bridle 1x
upper shroud 2x permanent backstay tackle 1x
Running Rigging
Inside the mast: Option:
- Main halyard - Spinnaker halyard (attached)
- Genoa halyard - Spinnaker uphaul
- Boom lift - Spinnaker downhaul
- 3 additional tripping lines
Inside the boom: 2 revving lines (battened sail); 1 clew outhaul
Complementing we refer onto the enclosed trim instructions of the manufacturer.
Caution
before of every sail: Test strings, cordage, lanyards and split pins. Safeguard the split
pins through adhesive tape or bending. Transpose deformed or damaged bolts.
1.3.3 Motorizing, engine room, gear, propeller
This yacht is equipped with a inboard diesel engine with a sail-drive gear and a fixed propeller (Option:
folded propeller).
The engine room is separated from living quarters by plywood-bulkheads covered with sound-insulating
material. An access is possible through:
-
a shutter below the companion way,
-
detachable bulkhead in the aftcabin beside the engine room
Cooling-water supply to the engine is realised via the saildrive-gear.