manualshive.com logo in svg

Bausch & Lomb STELLARIS PC, Руководство оператора

Поделиться
Скачать
Bausch & Lomb STELLARIS PC Скачать руководство пользователя страница 49

Operator’s Manual     1-39 

110017276EN Rev. B

1 Getting Started

     TruLink®  Customer  Support  Network  Remote  Access  (optional) 

 The   

TruLink

 ® Customer Support Network feature improves system reliability by supporting remote diagnostics 

and performance analysis. System performance data, but no patient data, is collected by the  

Stellaris® PC

  

 Vision Enhancement System  throughout the surgical day. Upon system shut down, that information can be sent 
to  Lomb secure servers through an encrypted, point to point connection. This allows  Lomb 
to analyze system performance, help you remotely (where this service is available), and proactively service the 
system. Surgeon preference files can also be transmitted, to provide a secure off-site backup. 

 The Ethernet cable that is used to transfer the data can be permanently connected to the  

Stellaris® PC

    Vision 

Enhancement System , or it can be connected at the end of each surgical day just before shutting down, and 
then disconnected to move or store the  

Stellaris® PC

   Vision Enhancement System . Upon shutdown from the 

 

End of Surgery screen

 , the system will offer a prompt to  

Send data to TruLink

 . If you agree, make sure that the 

Ethernet cable is connected to the designated port and follow instructions. After updating, the system will shut 
down automatically. 

        Multimedia  Center  (MMC)  (optional) 

 The MMC (if available) provides streaming video on the surgical screen and microscope overlay capability. The 
MMC supports NTSC and PAL format composite video and S-video, or a FireWire digital camera. 

 

Figure 1.24.  Multimedia Center (MMC) (optional). 

  1. Main Power Switch.   2. Connection Indicator LED from  Stellaris® PC   Vision Enhancement System .  

 3. Connection Indicator from microscope camera. 

  4. Connection Indicator LED to  

TruLink

 ® Customer Support Network.   

 Data is transferred between the MMC and the  

Stellaris® PC

   Vision Enhancement System  through an Ethernet 

cable that runs from the back of the MMC system to the Ethernet port on the bottom of the system. Whenever 
the MMC is on and connected and the  

Stellaris® PC

   Vision Enhancement System  is in surgical mode, the 

Содержание STELLARIS PC

































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды