2.5 Safety marking
Symbols and information signs can be found on the sensor PF55S
or in the working range. They refer to the immediate surroundings
in which they are mounted.
WARNING!
Danger due to illegible signage
Over time, stickers and signs may become dirty or oth-
erwise unrecognizable, meaning that the dangers are
not recognized, and necessary operating instructions
cannot be followed. This can lead to injury.
–
All safety instructions, warnings and operating
instructions must be easily legible at all times.
–
Damaged signs or stickers must be replaced imme-
diately.
DANGER!
Danger if the safety markings are missing or are
not understandable
Observe the component-specific safety information.
2.6 Securing against restart
When working on live components, you must ensure that they
cannot be restarted unintentionally. A system is secured against
unintentional restart when the power supply is switched off and the
main switch is secured with a lock.
If it is not possible to secure the main switch from being switched
on with a lock, the mains plug must be removed from the socket
and secured.
2.7 Responsibility of the owner
The owner is the person who operates or owns the sensor PF55S,
or who has assumed the decisive economic authority over the
technical operation of the equipment. Normally, the owner is not
Baumer, but rather the purchaser of the sensor PF55S.
The PF55S is used in the commercial sector. The PF55S owner is
therefore subject to the legal obligations concerning occupational
safety.
In addition to the safety instructions in this manual, the safety,
occupational health and safety and environmental protection regu-
lations applicable to the field of application of the system must also
be complied with.
Owner
Operating company's obligations
Safety and responsibility
Responsibility of the owner
05.03.2020
Flow sensor PF55S
11
