background image

18 

 

 

 

Er31 o Er47 

specifying the error code. 

No error! 
Child-proof protection activated. 

Deactivate child-proof protection. 

Cooking 
level back to 

Defect component on heating element. 

Contact authorized center for technical assistance - 
specifying the error code. 

OPERATING THE GAS BURNERS

 

 

Hob control elements 
for gas cooking zones 
 
 
 

 

Gas valve closed 

Ignition 

 

Maximum power 

 

Internal: Maximum power 
External: Minimum power 

 

Internal: Minimum power 
External: Gas valve closed 

Ignition and operation of 
the burners

 

 

 

User’s instructions  

This appliance must be used for the purpose it was designed for, i.e. domestic cooking. 
Any other use is considered to be improper and therefore dangerous. 
The manufacturer will accept no liability for any damage caused by improper, incorrect or 
irrational use. 

 

Using the burners  

 

If the burners are not used for several days, wait a few seconds before lighting them in 
order to release any air from the pipes. 

 

As the burners are fitted with an automatic ignition, to light them simply press and turn the
handle to the small star. The appliance uses a spark ignition generator. 

 

If the flame does not ignite within five seconds, turn the knob back to the 

ʺ

Gas valve 

closed

ʺ

 position and repeat the procedure; if the electric ignition should not work due to 

a power failure or damp spark plugs, the gas can also be ignited using a match or a gas 
lighter.  

 

For models with a safety tap (which interrupt the gas flow should the flame accidentally 
go out) the burners are ignited as described above, but ensure 

the knob is pressed in 

for 5 to 6 seconds after the flame has ignited.

 After this time, which gives the safety 

device enough time to cut-in, the flame will be on permanently. 

 

The flame can then be set between the maximum and minimum level. Any setting 
between 

ʺ

Gas valve closed

ʺ

 and the large flame is not recommended, as the flame is 

not stable in this interval and may be extinguished. 

 

To extinguish the flame and close the burner gas supply, rotate the control knob to the 

ʺ

Gas valve closed

ʺ

 position. 

 

WARNING: 

once the cook top has been cleaned, ensure that the burners are firmly in 

their seats and do not interfere with the igniter. 

 

WARNING: 

if the burner flame is extinguished accidentally, turn off the knob and leave it 

for at least one minute before trying to re-ignite it.

 

 

CAUTION:

 The gas cooking appliance use may cause heat, humidity and products of 

combustion in the room where is installed. Ensure that the kitchen is well ventilated 
especially when the appliance is in use: keep open any natural ventilation holes or install 
a mechanical ventilation device (mechanical extractor hood). Prolonged intensive use of 
the appliance may call for additional ventilation, for example opening of a window, or 
more effective ventilation, for example increasing the level of mechanical ventilation 
where present.

 

 
 
 
 
 
 

 

Содержание BMEH94I1G

















































Отзывы: