PNEUMATIC ZEUS mod. 2009
page 6
January 2009
WARNING RESET
OK
°C
UP
DOWN
FILTER
Reset
OK
RESET
OK
To exit
ESC
COVER
PROBE
Reset is necessary in order to delete the warnings from the display once maintenance
has been done.
Example:
WARNING: PROBE CLEANING NEEDED
is displayed.
1.
Gain access to SET,
2.
find
RESET WARNINGS
3.
press OK and find
PROBE
.
4.
press OK, RESET and then OK once again.
5.
ESC to exit the SET menu.
N.B. the warnings may be reset only if they are shown on the display.
MAINTENANCE
Password needed. Service Centre authorized access only.
MANUFACTURER
Password needed. Manufacturer authorized access only.
WARNING:
AFTER 10
ATTEMPTS TO ACCESS THE “
MAINTENANCE
” OR “
MANUFACTURER
”
MENU WITHOUT TYPING IN THE PASSWORD AND/OR BY TYPING THE WRONG
PASSWORD, THE SET MENU WILL BE BLOCKED. “
PASSWORD INSERTION BLOCKED
” will be
displayed. To unblock the set menu, contact the Authorized Service Centre.
LANGUAGE
OK
°C
UP
DOWN
ITALIAN
To confirm
language
OK
To exit
ESC
ENGLISH
GERMAN
FRENCH
SPANISH
PORTUGUESE
This menu allows the setting of the language.
10.
USE OF STEAM SUPER-HEATER
It is recommended to adjust the steam super-
heater between 120°
-
150° C. In
any case you can increase or decrease the temperature by pressing the keys,
thus obtaining a drier or more saturated steam. Every time the temperature
setting is changed, it will be displayed.
UP
DOWN
°C
