PNEUMATIC ZEUS mod. 2009
page 3
January 2009
5.
USE OF KEYS - STANDARD MODE
Verify that the electronic card is in
“standard” mode.
UP
DOWN
°C
“
Super-heater temperature
”
increase/decrease keys. Adjustable fro
m 120°C
to 260°C. Upon pressing one of the keys the
temperature set by the operator
will be displayed (
SUPER-HEATER TEMPERATURE).
If no key is pressed after 5
seconds, the timings for the 3 phases will be displayed (steam, air-steam,
air).
“Steam phase
timing
” increase
/decrease keys.
Timing may be set from 0 to 99 seconds.
“Air
-
steam phase timing” increase
/decrease keys.
Timing may be set from 0 to 99 seconds.
RESET
“Air phase timing” increase/decrease k
eys.
Timing may be set from 0 to 99 seconds.
ESC
“Clamp exclusion” key
(pneumatic version)
SET
Key to visualize memorized ironing programs.
OK
“Boiler on/off” key.
6.
USE OF KEYS
–
STAND-BY MODE
Verify that the
electronic card is in “stand
-
by”
mode.
SET
SET
By pressing the key while the electronic card is in stand-by
mode, it allows you to enter and exit the SET menu.
OK
OK
Key which allows you to confirm the choice made within the
SET menu.
