manualshive.com logo in svg

Basler BE1-11m, Инструкция по эксплуатации

Инструкция по эксплуатации Basler BE1-11m доступна для бесплатного скачивания на нашем сайте. Этот руководство содержит все необходимые инструкции по настройке и использованию этого продукта. Загрузите его сейчас, чтобы получить полную информацию о функционале Basler BE1-11m. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

54-2 

 

9424200996 

Introduction to Testing 

 

BE1-11

m

 

•

 

Setting validation 

•

 

Proper operation of equipment (main or auxiliary) 

•

 

Proper alarming (to SCADA) and/or targeting 

Periodic Testing 

Periodic testing can be performed at regularly scheduled intervals or upon an indication of problems or 

questionable operations within the BE1-11

m

. Verifying the integrity of the protection system’s 

performance, short of playback of recorded events, may be necessary by performing certain tests similar 

to those accomplished in the 

Acceptance Testing 

chapter. Verification that the BE1-11

m

 is measuring 

signals faithfully, that BE1-11

m

 logic is appropriate, and that protective elements and equipment (main or 

auxiliary) operate correctly are goals that can be achieved during this type of testing. 
Basler Electric recommends that all captured fault records and sequence of event records be analyzed 

and kept on file as in-service periodic test results for this particular device. This is an indication that all 

protective elements and the associated equipment are operating satisfactorily. 
It is not the intent of this manual to elaborate on every conceivable test possible because this would 

encroach on individual preferences, techniques, and philosophies. It is the intent to pursue relevant 

testing methods to verify this BE1-11

m

 meets published design specifications and applicability. 

Functional Testing 

Functional (or application) testing is significantly more comprehensive in nature and tests suitability for a 

particular application. Functional testing also provides a means to familiarize the user with the logic and 

operation of this device. Test setups are generally more involved and often include ancillary equipment 

beyond voltage or current source type equipment. While economics may at times prohibit full functional 

testing, it is recommended that some functional testing be performed when published specifications lack 

appropriate detail to satisfy application testing requirements. 
Basler Electric performs a thorough and comprehensive functional test of all protection systems before 

shipping. This ensures that this device is within specified tolerances, measures accurately, and operates 

correctly as designed. 

Testing and Troubleshooting Aids 

Under test or in-service, the BE1-11

m

 provides several ways to check operations, targets, or events. The 

status of the system is monitored by a continuous self-test. The most basic reporting function is targets. 

Targets can be viewed through BESTCOMS

Plus

®

 or the front-panel display. Fault Summary Reports, 

Sequence of Events Recorder (SER) Reports, and Oscillographic Records yield more detail. 
Each time a system disturbance occurs in or around this BE1-11

m

 zone of protection, it is a test of the 

BE1-11

m

 performance during the fault. If a questionable operation results in the need for troubleshooting, 

you have several ways in which to troubleshoot the BE1-11

m

, the installation, and overall application. 

Performance Testing 

Performance testing can be accomplished through the capture and playback of system fault records. In 

actual applications, this type of test realizes further confirmation of faithful BE1-11

m

 responses during 

system disturbances. For specific power system disturbances, protection systems can be subjected to a 

re-creation of captured events with the aid of equipment capable of replicating COMTRADE record files. 

In these instances, there is significant merit in testing protection systems in this manner to assess 

BE1-11

m

 performance. Correct response of BE1-11

m

 action in a performance test is supplemental 

verification of the conclusions drawn from functional (or application) tests. 
This type of testing verifies not only whether the device operated correctly for a particular system 

disturbance but also offers additional confirmation of your protection philosophy in this application. It is 

beyond the scope of this manual to develop performance tests for this device. For assistance in 

developing these types of tests, please consult Basler Electric and your test equipment. 

Содержание BE1-11m



































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для BE1-11m

Sharp 56DR650 - 56" Rear Projection TV Operation Manual preview
56DR650 - 56" Rear Projection TV
Бренд: Sharp Страницы: 72
Toshiba TZ50V51 Owner'S Manual preview
TZ50V51
Бренд: Toshiba Страницы: 44
Toshiba TZ43V61 Owner'S Manual preview
TZ43V61
Бренд: Toshiba Страницы: 46
Toshiba TW56X81 Owner'S Manual preview
TW56X81
Бренд: Toshiba Страницы: 50
Toshiba TP55F80 Owner'S Manual preview
TP55F80
Бренд: Toshiba Страницы: 64
Toshiba TW56D90 Owner'S Manual preview
TW56D90
Бренд: Toshiba Страницы: 71
Toshiba TP61E90 Owner'S Manual preview
TP61E90
Бренд: Toshiba Страницы: 67
Toshiba TP55E80 Owner'S Manual preview
TP55E80
Бренд: Toshiba Страницы: 67
Toshiba TW56F80 Owner'S Manual preview
TW56F80
Бренд: Toshiba Страницы: 87
DBI SALA Sayfline 7603000 User Instruction Manual preview
Sayfline 7603000
Бренд: DBI SALA Страницы: 16
Magnum Dimensions MP-RFC Instruction Sheet preview
MP-RFC
Бренд: Magnum Dimensions Страницы: 2
QUICK DAM FLOODGATE QDFG45 Frequently Asked Questions preview
FLOODGATE QDFG45
Бренд: QUICK DAM Страницы: 2
Leader LC 2132 Instruction Manual preview
LC 2132
Бренд: Leader Страницы: 8
Samsung HLK436W Instruction Manual preview
HLK436W
Бренд: Samsung Страницы: 20
THOMSON DLW 616 Specification preview
DLW 616
Бренд: THOMSON Страницы: 2
THOMSON ITC251 Owner'S Manual preview
ITC251
Бренд: THOMSON Страницы: 21
Moeller Z-FW-LP Installation Instructions Manual preview
Z-FW-LP
Бренд: Moeller Страницы: 8
LittleLife L10621 Instructions preview
L10621
Бренд: LittleLife Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды