manualshive.com logo in svg

Basler Vision Technologies Sprint Series, Руководство пользователя

Поделиться
Скачать
Basler Vision Technologies Sprint Series Скачать руководство пользователя страница 39

Physical Interface  

Basler sprint Mono Cameras

29

2.4

Cabling Requirements

2.4.1

Camera Link Cable

The Mini D Ribbon (MDR) cables used between the camera and your frame grabber must comply 
with the Camera Link specification. Compliant MDR cable assemblies in several different lengths 
are available from Basler as stock items. Contact your Basler sales representative for more 
information. 

The maximum allowed length for the MDR cable used with a sprint camera is 10 meters.

2.4.2

Power Cable

A Hirose, 6-pin locking plug will be shipped with each camera. This plug should be used to connect 
the output cable on your power supply to the camera.

For proper EMI protection, the power supply cable that is terminated with the Hirose connector and 
attached to the camera must be a twin-cored, shielded cable. Also, the Hirose plug must be 
connected to the cable shield and the shield must be connected to earth ground at the power 
supply.

A power supply and cable assembly that meets these requirements is available from Basler. 
Contact your Basler sales representative for more information.

An Incorrect Plug Can Damage the Camera’s 6-pin Connector

The plug on the cable that you attach to the camera’s 6-pin connector must be 
a plug for 6 pins. Using a plug designed for a smaller or a larger number of 
pins can damage the pins in the camera’s 6-pin connector.

CAUTION

Содержание Sprint Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды