Serial.link
Manual
7
/
12
v.1.3
© 2018 basalte
1.5
Serial.link
–
hardware overview
Dimensions
The Serial.link is a 9-DIN rail module (158mm or 6 7/32 inches wide), 90mm high and 58mm
deep.
Status LED (1)
The central LED will report the status of the Serial.link:
•
White: normal operating mode, actual status depends on central processor used :
o
Lutron
®
: the Serial.link has established a connection with the Lutron
®
processor.
•
Blue: Configuration loaded, no connection active with Lutron® processor.
•
Blue blinking: no configuration loaded in the Serial.link.
•
Red: firmware upgrade of Serial.link ongoing (no commands can be send to the module).
•
Yellow: reboot of Serial.link initiated.
•
Yellow blinking: wrong telnet login used.
Reset button (2)
The reset button can be used to either reboot or reset Ethernet settings:
•
Pressing 3
–
7 seconds will reboot the Serial.link, the status LED will blink yellow once.
•
Pressing 7-10 seconds (LED turns green) will reset the Ethernet configuration of the
Serial.link to default, the status LED will blink yellow once.
Data feedback LED (3)
The data feedback LED is located next to each data connector. When data is transmitted over a
specific data-line, the LED will light up green.
