Serial.link
Manual
6
/
12
v.1.3
© 2018 basalte
1.4
Auro Motion sensors
Description
Auro RS485 is a miniature motion sensor which, when mounted in the ceiling, completely blends
into the environment due to its innovative flat design.
Only requiring an opening of 1.7”, it is very easy to install.
Auro has a built-in light sensor to use for light dependent switching, dimming and controlling
scenes.
The internal temperature sensor discretely reports the room temperature to the home automation
system, while it can also be used to trigger a heat alarm in case of an abnormal temperature rise.
With a vertical detection angle of 90° it has a detection area with a diameter of 16 ft when installed
at a height of 8 ft, making it perfect for hallways, toilets and small rooms.
The white internal LED provides feedback of detected motion and can be manually controlled.
Auro RS485 - installation
General guidelines for installation are described in the ‘
Auro RS485 installati
on manual’.
Important remarks concerning installation:
•
Configure the RS485
address
prior to installing the sensor into the ceiling. The assigning
and testing of Auro addresses can be done using the Serial.link configuration tool (see
separate application note for Lutron
®
). Please note that the address is in hexadecimal
notation.
