Bartscher US PPlus500 LPWR Скачать руководство пользователя страница 14

EN

page 42

It is mandatory to repeat the washing cycle if at the end of the cycle the crockery  are not well clean or if there are 
washing residues (glasses, cups, bowls, etc. with liquid inside). 

3.3 Detergent use

By request the dishwasher can be equipped with an electric detergent dispenser (always recommended). The machine 
automatically sucks the detergent.
The detergent shall be the NO FOAM type, suitable for industrial dishwashers. The use of good quality liquid detergents is 
recommended.
Follow the manufacturer’s recommendations for chemical dosage, related to the local water hardness. 
A correct amount of detergent is very important for a successful wash.
Should the detergent lack the 

F10

 indicator on the display 

fl

 ashes (only with optional "Sensor for Chemicals Low Level"). 

3.4 Rinse aid use

The machine has a standard rinse aid dispenser. The machine automatically sucks the product.
The rinse-aid chemical, shall be suitable for professional glass and dishwashers. It is advisable to rely on specialized retailers 
in the sector.
Should the rinse-aid chemical lack the 

F19

 indicator on the display 

fl

 ashes (only with optional "Sensor for Chemicals Low 

Level"). 

3.5 Drain pump system (option)

The cycle drain pump works in an automatic and independent way.
At the end of the day, to completely empty the tank: 
Remove the over

fl

 ow.

Close the door. Press the KEY 

D

; the tank draining indicator 

F3

 and the totalizer turn on for the time set by the program.

After the draining is complete, the machine turns automatically in 

STAND-BY

 mode.

This operation is also possible with machine in stand by-mode. Once 

fi

 nished, the machine returns to the initial mode.

See chap. 

8

 if an alarm appears. 

Note:

 The machine must not be switched ON during the emptying phase.

IMPORTANT: Always turn the main wall switch off and close the water valve at the end of use.

Содержание US PPlus500 LPWR






























Отзывы: