Bartscher US PPlus500 LPWR Скачать руководство пользователя страница 13

EN

page 41

• The machine is ready for a new wash. 

Note: 

It is advisable to change the tank water, by means of another 

fi

 lling, at least every 30 washes or twice a day. An alarm 

fl

 ashes when this operation is needed (see 

Warning

).

Note: 

The machine does not accept other cycles until the door is opened or the key 

Start A

 is pressed for two seconds.

3.1.3 Switching OFF

• Keep pressed the key 

E

. The machine will turn in stand by-mode (

F4

 steady red indicator).

• Drain the wash-tank. Take o

  the over

fl

 ow pipe. For machines equipped with drain pump see par. 

3.5

.

• At the end of the day, clean the machine (see chap. 

6 Maintenance

).

• Shut the water valve.
• Switch the main power switch OFF.

3.2 Cutlery and crockery loading

Before cutlery and crockery loading in the machine, coarsely clean them from the leftover food. 

It isn't necessary to rinse the cutlery an crockery under water.

ATTENTION: Do not wash articles polluted with petrol, paint, chips of steel or iron, ash, sand, 
wax, lubricant grease. These substances damage the machine. Do not wash fragile objects or 
material not resistant to the washing process. 

Note the following recommendations:
• 

Crockery and cutlery should not be inserted inside one another, covering each other.

• 

Place the crockery in order to all surfaces can be reached by water; otherwise the dishes are not 

washed. 
• 

Make sure all the crockery are in a stable position and that the hollow containers don't overturn 

(cups, glasses, bowls, etc.) .
• 

Place in the rack all the hollow containers such as cups, glass, etc. 

upside-down

.

• 

Place the crockery with deep hollow with upper face downwards, so that water can 

fl

 ow out.

• 

Make sure the smaller crockery do not fall from the rack. 

• 

Check all the wash arms runs freely and they are not blocked by too tall or too prominent crockery. 

Eventually, run a manual rotation of the arms to check it. 
Some foods, such as carrots, tomatoes, and others, may contain some natural dyes substances, that in 

large amounts, can alter the crockery and plastic parts colors.
Any discoloration does not mean that the plastic is not heat resistant.

Crockery and cutlery not suitable for dishwasher

Not suitable for dishwasher:
•  Wooden crockery and cutlery or with wooden parts; water at high temperature causes deformation to wood. Also the 

adhesives used are not suitable for treatment in the dishwasher; a consequence could be the handles detachment.

•  Crafts, precious vases or decorated glasses.
•  Not heat-resistant plastic crockery. 
•  Copper, brass, pewter or aluminum objects: they may become discolored or opaque. 
•  The decorations on glass, after a certain number of washes, can lose gloss.
•  Fragile glasses or crystal items, if often washed, can become opaque.
We recommend to buy exclusively crockery and cutlery suitable for dishwashing.
After several washes, the glass can become opaque.

• At the end of the cycle the key 

Start A

 alternatively 

fl

 ashes in blue/green. The display shows the message 

END

 and the 

F1

 totalizer is completed.

Содержание US PPlus500 LPWR






























Отзывы: