Cleaning and Maintenance
117900
83 / 86
EN
The rear wall (fan cover) of the baking
chamber can also be removed for cleaning.
3. Loosen manually the four large fixing
screws at the rear wall (fan cover) (Fig.
49).
4. Carefully remove the rear wall (fan
cover|) from the appliance and clean it.
5. Clean the rear area behind the rear wall
(fan cover) carefully, using thick
protective gloves, in order not to cut
yourself with sharp parts of the fan and
the oven.
ATTENTION!
When cleaning the area behind the rear
wall (fan cover), be careful not to damage
the temperature sensors located at the
top left side, as well as heating elements.
Heating elements and temperature
sensors must not be cleaned.
Fig. 49
6. After cleaning, re-install the rear wall (fan cover) back in place and fix it four
fixing screws manually, without using tools.
7. Finally, check that all components are firmly in place.
Water spray nozzle
It is necessary to clean the water spray nozzle regularly, because during the baking
process particles of different types and sizes are blown off the products and can
clog the water spray nozzle.
The water spray nozzle is located at the upper wall of the chamber.
1. For cleaning, unscrew the water spray nozzle (Fig. 50).
2. After removal, wash the water spray nozzle using water with a mild detergent.
3. After cleaning, rinse the individual components of the water spray nozzle in
fresh water (Fig. 51).
4. Re-install the water spray nozzle in the appliance.
