Bartscher 29621, Инструкция по установке, эксплуатации и обслуживанию, Страница: 25 / 126

9
ENGLISH
GB
6.4. Cleaning of the oven
When the oven is cold remove bottom and guides.
After cleaning switch the empty oven to avoid
corrosion.
Follow the instructions below:
Remove the oven bottom ( A ) and grill ( B )
and clean them thoroughly.
Clean the oven interior from any burnt
residuals which may disturb correct
operation.
Clean the surface and replace the oven
elements.
7. PROBLEMS DURING OPERATION
The information below is provided to recognize
and repair any failures that may occur when
operating the appliance.
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Problem Cause Solution
The heating plates do not work.
The electrical connection is not
correct.
Check connection of supply cable.
Contact the service company.
Activation of temperature
limiter.
Wait until the thermostat in the
heating plates restores normal
operation.
Damaged switch.
Replace the part.
Contact the service company.
The heating plates remain hot.
Disturbance of the heating
plate operation
When problem persists
contact the service company.
The oven heating coils do not
work.
The electrical connection is not
correct.
Check connection of supply cable.
Contact the service company.
Activation of temperature
limiter.
Wait for the oven to cool down. Then
reset the thermostat (see special
section).
Damaged switch.
Replace the part.
Contact the service company.
The oven does not reach the
preset temperature. Damaged operational
thermostat.
Replace the part.
Contact the service company.
B
A
ID 03