Bartscher 206782, Руководство пользователя

Страница: 52 / 228

48
Replacing the lamp
o
NOTE: Strictly follow the instructions below to avoid electric shock or injury:

Cut off the power supply and allow the
convection oven to cool down.

Unscrew the bolts with which the side
container rails are secured to the walls.
Remove them from the cooking chamber.

Remove glass cover A . Make sure not to
damage seal C . Replace lamp B by a lamp of
the same parameters.

Screw glass cover A back. Make sure not to
damage seal C .
o
Re-attach the container rails to the side walls and make sure that they are securely
fastened.
o
If the glass cover turns out to be faulty or damaged, do not use the convection oven
until it is replaced (please contact your customer service).
Replacing and cleaning the cooling filter (the back)
NOTE: Strictly follow the instructions below to
avoid electric shock or injury:

cut off the power supply and allow the
convection oven to cool down.

unscrew the bolts fastening the cooling filter
and replace or clean it;

when finished assembler All these parts
together.
5.2.4 Special maintenance
o
On a regular basis (at least one a year), have the device checked by a qualified
licensed technician. Please contact the customer service department for that matter.
o
Before performing any operation, disconnect the power supply, closing off the water
taps and wait until the oven cools down.
o
Before moving the unit from its normal position, check if the wiring and piping are cut
off in the right way.