Bartec PBTC-200, Руководство по эксплуатации и установке

Страница: 13 / 48

Operation and Installation Manual PBTC-200
21-54C3-7D0001/-
04/2021-EHT-441168 Notice: Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 11 / 45
5.3 LED-Status Indication
The operating status of the thermostat module is indicated by the LED status display. This is indicated by color and flashing codes.
Description of the color and blink codes:
Status
LED display Continuous ON 1 flash impulse 2 flash impulse 3 flash impulse 4 flash impulse
OK
Green
Thermostat modul in oper-
ation,
Heating cable in operation Thermostat mod-
ule is ready for
operation - - -
Warnung
Yellow
Temperature-WARNING,
Temperature at the Re-
sistance Temperature De-
vice Pt100 outside the set
temperature
warning
thresholds
Device tempera-
ture of the ther-
mostat module
exceeds the de-
fined warning
limits 80% lifetime of
the thermostat
module reached,
plan and prepare
replacement of
the thermostat
module Contact problem
at the Re-
sistance Tem-
perature Device
Pt100 or temper-
ature rise at the
Resistance Tem-
perature Device
Pt100 too high -
Alarm
Red
- Resistance Tem-
perature Device
Pt100 short-cir-
cuited or defect Cable connec-
tion to Re-
sistance Tem-
perature Device
Pt100 too long,
cable cross sec-
tion too small
(connection re-
sistance too
high) or Re-
sistance Tem-
perature Device
Pt100 not con-
nected 100% lifetime of
the thermostat
module reached,
heating cable
switched off, re-
place thermostat
module Temperature of
thermostat mod-
ule too high,
heating circuit is
switched off