BARTEC BENKE HYGROPHIL F 5673, Руководство по эксплуатации, Страница: 93 / 129

Programming
5-31
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.9 Serial output
● Open the menu „Serial output“.
● Set the parameters of the serial output as required.
Use the arrow keys to scroll the window.
Parameter Possible settings Comments
Cycle Time Off
10 seconds
1 minute
10 minutes
1 hour
1 day Time interval after which there is an output to the serial inter-
face.
Package Minimum
Maximum Number of measurement variables issued per record.
(Min: Date, Time, Channel, TT, SP, HCDT, DT, state of ER-
ROR-relay, state of Limit-relay)
Max: Date, Time, Channel, TT, SP, WL, VOL%, PPM, DT,
HCDT,FP, MC, VP, state of ERROR-relay, state of
Limit-relay)
Baudrate 1200
2400
4800
9600
19200
Number of databits 7 Databits
8 Databits
Number of stopbits 1 Stopbit
2 Stopbits
Parity No Parity
Odd Parity
Even Parity
Send error codes? Yes
No You can choose output the error codes or not.
End of line LF
CRLF Code to be used for end of line (depending on operating sys-
tem)