BART LABDMM2, Руководство пользователя

Страница: 42 / 57

LABDMM 2 USER GUIDE
MO.LABDMM2.560.ENG.R1
Pag. 14
20. DATA LOGGER (Option)
If the data logger option is enabled in the menu, the following configuration parameters are enabled.
21. DATA LOGGER PARAMETERS
t1
h.mm.ss
Defines the time between 2 ACQUISITION INTERVALS .
You can set: h = hours, mm = minutes, ss = seconds
Example: 1.30.05 = 1 hour, 30 minutes and 5 seconds
Changing this parameter will reset the current log to zero.
t2
hhh.mm
Defines the global time of CYCLE DURATION .
You can set: hhh = hours, mm = minutes
Example: 024.30 = 24 hours and 30 minutes.
For times longer than 1000 hours the display format changes showing only the
hours allowing you to set
t2 times up to 10000 hours
t On
t OFF
Enables / disables the storage of the TEMPERATURE .
By setting tOFF it is possible to record only the PRESSURE and memorize up to
130,000 measuring points.
By setting
tOn it is possible to record both the PRESSURE and TEMPERATURE and
memorize up to 65,000 measuring points.
22. DISPLAY AND SETTING OF DATE AND TIME
hh.mm
Display of current hour and minute, it’s active only if Datalogger option is
enabled.
+
Press the keys simultaneously for a few seconds SET and PEAK.
P0000
Set the password 8321 (

) and confirm with SET.
d1
Allow to set the YEAR
Modify the parameter using the  and  keys.
Confirm with SET to go to the next parameter.
d2
Allow to set the MONTH
Modify the parameter using the  and  keys.
Confirm with SET to go to the next parameter.
d3
Allow to set the DAY
Modify the parameter using the  and  keys.
Confirm with SET to go to the next parameter.
d4
Allow to set the HOUR
Modify the parameter using the  and  keys.
Confirm with SET to go to the next parameter.
d5
Allow to set the MINUTE
Modify the parameter using the

and

keys.
Confirm with SET to finish setting the date and time.