BART LABDMM2, Руководство пользователя

Страница: 38 / 57

LABDMM 2 USER GUIDE
MO.LABDMM2.560.ENG.R1
Pag. 10
12. PURCHASING CODES
TLDMM Pressure CX41 Full Scale OPTION
R = Relative 0B1 5B 250B 1KB5 S = RS232C
A = Absolute (2) 0B2 10B 350B 2KB W = WIRELESS
0B5 20B 500B 2KB5 (3)
1B 50B 700B 3KB (3)
2B5 100B 1KB
Example: T L D M M 2 R C X 4 1 5 0 B S
TDMMV Relative Vacuum version
(2)
ACCREDIA Certificate in RELATIVE mode.
ACCREDIA calibration in ABSOLUTE mode CAN NOT be performed by the LAT Center N ° 093.
On request it can be commissioned to other accredited calibration Centers.
(3)
ACCREDIA calibration CAN NOT be performed by the LAT Center N ° 093.
On request it can be commissioned to other accredited calibration Centers.
13. SAFETY WARNINGS
The installation and maintenance of the product must be made only by trained personnel and after reading this
manual.
It will also be observed all safety standards under current legislation in the country where it will be installed.
The pressure gauge must not be used for purposes other than those indicated in the "Field of Application":
otherwise BART transducers disclaims any liability.
In particular it is noted that the product supplied is not a safety device.
BART
in the design has taken every precaution to minimize the risk to your safety, but recommends
that responsible for installing the analysis and removal of any residual risks.
Remember that the safe use of the product requires its complete integrity: why should be paid attention to the
transportation and storage.
In the following pages are identified tricky operations and / or possible sources of risk to the user
or equipment with the symbol by side.