36
Pre-recorded messages
Three pre-recorded messages can stored internally to the interconnect. They are used to provide information to the
users of the interconnect and can be up to 15 seconds long. The three messages are respectively;
“Welcome”. When someone calls into the interconnect from a phone line this message is played to the
phone line. This also can be used to provide instructions on the use of the interconnect.
“No Dial Tone”. When a phone call is made by the interconnect, the presence of a dial tone is checked first
(See Enabling Dial Tone Checking). If no dial tone is found then this message is transmitted to the
transceiver.
“Access Denied”. When a user of the interconnect attempts to use a feature that they have not paid for, this
message will be played.
Playing a Pre-Recorded Message
Select “Play Message” from the “Voice Msg’s Menu”.
Select the message to play.
The message will now be played to the interconnect’s front speaker.
Recording a Message
Select “Record Message” from the “Voice Msg’s Menu”.
Select the message to record.
Using a microphone plugged into the front panel, press the PTT button to start recording the message.
