Barrett 960 HF Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 71

background image

11

Sending an ALE call

ALE calls may be sent to Interconnects fitted with the ALE option. The transceiver must also be fitted with an ALE
board.

Preset numbers are allocated by the Interconnect operator. Preset numbers are allocated according to which
destination address is used.

Manual mode overview

In manual mode the 960 interconnect will act as a HF base station and :-

Enable the operator to send Selcalls to stations on the HF network.

Enable the operator to send Telcalls to stations on the HF network.

Receive incoming Selcalls from the HF network and manually forward the call to the pre-set telephone
number within the 960 that is associated with selcall number received.

Receive incoming Telcalls from the HF network and forward these manually to the telephone network.

Note:- To operate the 960 in manual mode, the option ‘Auto on Power up’ should be set to 'Manual', in the
‘Operational Menu’ - refer to the setup section later in this manual.

Receiving a Selcall from a HF station

On receipt of a Selcall directed to your 960 , it will be displayed on the front panel and an alarm will sound.

To on-forward the call

To on-forward the call to the pre-set telephone, stored in your 960 and associated with the received selcall number,
press the 'LEFT' key. The 960 will process the request, the telephone number will be dialled and the HF user will
be connected to the telephone party.

To communicate by voice with the calling HF user

Press the 'RIGHT' key. This will cancel the audible alarm and allow conversation with the HF user to commence.

Receiving a Telcall from a HF station

On receipt of a Telcall directed to your 960 , it will be displayed on the front panel and an alarm will sound.

To on-forward the call

To on-forward the call to the telephone number, sent within Telcall by the HF station, press the 'LEFT' key. The 960
will process the request, the telephone number will be dialled and the HF user will be connected to the telephone
party.

To communicate by voice with the calling HF user

Press the 'RIGHT' key. This will cancel the audible alarm and allow conversation with the HF user to commence.

Incoming phone calls

When the 960 is in 'Manual' mode, all incoming telephone calls are ignored. They are recognised but not answered.

A standard telephone should be connected in parallel to the 960, the call can then be manually answered by the
operator. The operator can then Selcall the required HF station using the manual operator's control menu. Once
contact is established, the telephone caller is connected to the HF station by selecting 'Place On Line' from the
manual operator's control menu.

«
...
9
10
11
12
13
...
»

Содержание 960 HF








































































Отзывы:

Нет отзывов

Похожие инструкции для 960 HF

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 280

KXTVS100 - VOICE MAIL SYSTEM

Бренд: Panasonic Страницы: 91

Бренд: Panasonic Страницы: 872

Easa-Phone VA-208

Бренд: Panasonic Страницы: 45

Easa-Phone VA-208

Бренд: Panasonic Страницы: 45

Бренд: Panasonic Страницы: 128

Бренд: Panasonic Страницы: 408

Бренд: IBS Страницы: 24

Бренд: Panasonic Страницы: 1

CurrentWatch EGF Series

Бренд: Eaton Страницы: 4

CurrentWatch EGF Series

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 4

Бренд: Eclipse Страницы: 6

Бренд: Hach Страницы: 44

Бренд: Habasit Страницы: 14

Бренд: Harol Страницы: 17

Бренд: Cab Technology Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды