Baroness LM551, Руководство по эксплуатации для владельца, Страница: 89 / 102

Adjustment of Mower Stoppers of Mower Units #2
and #3
Important
The installation positions of the mower
stoppers of mower units #2 and #3 differ
depending on the installation positions of the
mower units.
The mower stopper is installed to prevent the
mower unit from interfering with the frame.
As with the mower units, the mower stoppers
for mower units #2 and #3 can be slid to the
front position or rear position. The slide
distance is 200 mm (7.87 in).
Install in the appropriate position.
On a level surface, lower all mower units.
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Stop the engine.
Open the hood.
Open the underseat cover.
Remove the nuts for the mower stoppers of
mower units #2 and #3.
1
2
3
2
3
oxie9a-002
Adjustment of Mower Stoppers of Mower Units #2 and
#3_001
1 Nut
2 Spring washer
3 Washer
Follow the steps below to adjust the
position of the mower stopper.
When moving to the front position:
Slide the mower stopper from the rear
position to the front position.
1.
2.
3.
4.
5.
6.
7.
･
1
oxie9a-003
Adjustment of Mower Stoppers of Mower Units #2 and
#3_002
1 Mower stopper
When moving to the rear position:
Slide the mower stopper from the front
position to the rear position.
1
oxie9a-004
Adjustment of Mower Stoppers of Mower Units #2 and
#3_003
1 Mower stopper
Temporarily install the nuts.
Start the engine.
Raise all mower units.
Tighten the temporarily installed nuts of the
mower stoppers of mower units #2 and #3
in a position where the mower units are
leveled and contact the mower stoppers.
･
8.
9.
10.
11.
Maintenance
LM551
Maintenance
Page 5-25
Maintenance Work