Baroness LM551, Руководство по эксплуатации для владельца, Страница: 44 / 102

To release:
Insert the cotter pin into the lower hole in the
mower stopper pin.
4
3
1
2
famlj4-004
Adjustment of Mower Stopper Pin_002
1 Mower stopper pin
2 Cotter pin
3 Mower arm
4 Mower coupling
Adjustment of Mower Stabilizer
Note:
Depending on the specifications, this function
may not be available.
Important
After adjusting the cutting height, adjust the
mower stabilizer.
The mower stabilizer stabilizes the mower units
and prevents an undulating finish (a
phenomenon called Marcelling).
On a level surface, lower all mower units.
Apply the parking brake, and then stop the
engine.
Loosen the lock nut.
Tighten the nut to adjust the length of the
spring (compression).
Mower #1 to #5: 140.0 mm (5.51 in)
Tighten the lock nut.
1.
2.
3.
4.
･
5.
A
1 2
3
3ttzyg-002
Adjustment of Mower Stabilizer_001
1 Lock nut
2 Nut
3 Spring
A 140.0 mm (5.51 in)
Adjustment of Stopper Nuts
The stopper nut adjusts the movement range
of the mower unit.
Stop the engine.
Apply the parking brake, and then stop the
engine.
Important
When a grass catcher is installed on LH52 (5-
inch mower unit), a large movement range of
the mower may cause the grass catcher to
come into contact with the front roller when
the mower unit is raised.
Exercise care in the position of the stopper
nut.
Turn the nut to adjust the length of A.
Mower #1, #4 and #5: 15.0 mm (0.59 in)
Mower #2 and #3: 40.0 mm (1.57 in)
When a grass catcher is installed on LH52
(5-inch mower unit):
Mower #1, #4 and #5: 30.0 mm (1.18 in)
Mower #2 and #3: 40.0 mm (1.57 in)
1
2
A
xfbq2u-001
Adjustment of Stopper Nuts_001
1.
2.
3.
･
･
･
･
LM551
Handling Instructions
Page 4-20
Adjustment Before Operating