Baroness LM551 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 102

Baroness LM551 Скачать руководство пользователя страница 62

Towing the Machine

If the machine does not travel due to engine
trouble, etc., you can move it in the following
ways:

Caution

Do not touch the unload valve except when
towing the machine.

Caution

Before starting the engine, be sure to close
the unload valves.

Important

When towing the machine, travel at a speed
no more than 3.0 km/h.
In addition, do not tow the machine for more
than 3 minutes.
If the towing speed is too fast or there is
excessive movement, the pump or motor will
be damaged.

Important

Do not loosen the unload valve three turns or
more.

Stop the engine.
"Procedure to Stop Engine" (Page 4-22)
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Chock the wheels.
Secure the rope to the tow hook.

1

gay3t1-014

Towing the Machine_001

1

Tow hook

Open the underseat cover.
"Underseat Cover" (Page 4-34)

1.

2.

3.
4.

5.

Turn the unload valve under the seat 1 to 1.5
turns counterclockwise.

1

gay3t1-013

Towing the Machine_002

1

Unload valve

Close the underseat cover.
Remove the wheel stoppers.
Firmly depress the brake pedal to release
the locking pedal.

Warning

While towing, always keep your foot on the
brake pedal and depress the brake pedal at
any time to stop.

Tow the machine slowly.

6.

7.
8.
9.

10.

LM551

Handling Instructions

Page 4-38

Travel of Machine

«
...
60
61
62
63
64
...
»

Содержание LM551







































































































Отзывы:

Нет отзывов