Baroness LM551, Руководство по эксплуатации для владельца, Страница: 36 / 102

1
2
A
B
v1spa6-005
Draining of Water Separator_003
1 Fuel cock
2 Air-bleeding plug
A ON (open)
B OFF (close)
Loosen the air-bleed plug to bleed the air.
When the cup is filled with fuel, close the
air-bleed plug.
If the engine does not start within 15
seconds after switching the ignition key to
the "START" position, wait at least 30
seconds, and then repeat the same
operation.
If there is still air in the cup after starting the
engine, bleed the air again.
Cleaning of Water Separator
Important
Water-contaminated fuel may impair engine
startability, decrease output or damage engine
parts.
Clean the water separator after at least the
number of hours in the Maintenance Schedule
and whenever debris has accumulated in the
cup.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
Close the fuel cock of the water separator.
9.
10.
11.
1.
2.
3.
1
2
A
B
v1spa6-005
Cleaning of Water Separator_001
1 Fuel cock
2 Air-bleeding plug
A ON (open)
B OFF (close)
Remove the ring nut, and then remove the
cup.
3 2
1
v1spa6-006
Cleaning of Water Separator_002
1 Ring nut
2 Cup
3 Element
Drain the water from the cup.
Clean the cup and element with diesel fuel.
Important
During installation, prevent contamination with
dirt or dust.
If the fuel is contaminated with dirt, dust, etc.,
the fuel injection pump and injection nozzle
will become worn.
Correctly install all parts in their original
positions.
Fill up the fuel tank with fuel.
Open the fuel cock of the water separator.
4.
5.
6.
7.
8.
9.
LM551
Handling Instructions
Page 4-12
Inspection Before Use