Baroness LM551, Руководство по эксплуатации для владельца, Страница: 88 / 102

When moving to the rear position:
Loosen bolt A of mower unit #3.
Remove bolts B of mower unit #3.
3 2 1
enwg3v-004
Adjustment of Positions of Mower Units #2 and #3_004
1 Frame
2 Bolt A
3 Bolt B
In the same way, loosen bolt A and
remove bolts B of mower unit #2.
Slide mower units #2 and #3 from the
front position to the rear position.
1
enwg3v-005
Adjustment of Positions of Mower Units #2 and #3_005
1 Mower unit
Install bolts B of mower unit #3.
In the same way, install bolts B of
mower unit #2.
Tighten bolt A and bolts B on both
sides.
Adjust the mower stoppers of mower units
#2 and #3.
"Adjustment of Mower Stoppers of Mower
Units #2 and #3" (Page 5-25)
Re-secure the mower unit up/down cylinder
hoses with clamps.
･
[1]
[2]
[3]
[4]
[5]
[6]
[7]
7.
8.
Adjustment of Mower Stopper
Adjustment of Mower Stoppers of Mower Unit #1
The mower stopper is installed to prevent the
mower unit from interfering with the frame.
Install in the appropriate position.
On a level surface, raise all mower units.
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Stop the engine.
Follow the steps below to adjust the
position of the mower stopper.
Loosen the nuts of the left and right
mower stoppers.
Tighten the nuts of the left and right
mower stoppers in a position where the
mower unit is leveled and contacts the
mower stopper.
5
3 4 2
3 4
1
2
oxie9a-001
Adjustment of Mower Stoppers of Mower Unit #1_001
1 Mower stopper
2 Bolt
3 Spring washer
4 Washer
5 Nut
1.
2.
3.
4.
[1]
[2]
LM551
Maintenance
Page 5-24
Maintenance Work