Baroness LM351, Руководство по эксплуатации для владельца

Страница: 59 / 75

Procedure to Stop Engine
Set the traveling pedal to the neutral
position.
Apply the parking brake.
Set the reel rotation switch to the "Stop"
position.
Raise all the mower units.
Set the anti-falling stop valve to the "STOP"
position.
Shift the throttle lever to the "Low speed"
position, and then idle the machine for 1 - 2
minutes.
Switch the ignition key to the "OFF" position.
Make sure that the engine has stopped.
Parking and Stopping
Leaving the machine
Caution
If the brakes are not sufficiently effective, use
the wheel stoppers to secure the machine.
Caution
Never park the machine on a slope.
Park the machine on level ground.
Apply the parking brake.
Stop the engine.
Remove the ignition key.
Install the rubber cap to the key switch.
Leave the driver's seat.
Close the fuel cock of the fuel filter.
Close the fuel cock of the water separator.
Move
Traveling Procedure
Caution
Under any circumstances drive the machine at
such a speed that you can stop it immediately
for emergencies.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
Important
Do NOT start to move or stop the machine
abruptly.
It will damage the hydraulic system or result in
oil leakage.
Start the engine.
(Refer to "Procedure to Start Engine")
Make sure that all the mower units are
raised.
Make sure that the anti-falling stop valve is
set to the "Stop" position.
Gradually shift the throttle lever to the "High
speed" position.
Release the parking brake.
Slowly depress the traveling pedal.
The machine starts traveling.
Release the traveling pedal and depress the
brake pedal to stop the machine. 1.
2.
3.
4.
5.
6.
7.
8.
Handling Instructions
LM351
Handling Instructions
Page 5-13
Parking and Stopping