Baroness LM351, Руководство по эксплуатации для владельца

Страница: 52 / 75

Important
In the case that there are still air bubbles in
the fuel from air-bleeding plug even after 15
seconds or more passed after setting the
ignition key to "START", pause for 30 seconds
or more and then repeat the same procedure.
If the starter rotates and air bubble of the
fuel from the air-bleeding plug has gone,
return the ignition key slowly to "OFF"
position and tighten the plug.
Inspection of Fuel Filter
Make sure that there is no fuel leakage.
Make sure that the filter is not damaged.
Make sure that the filter is not
contaminated.
Inspection of Coolant
Caution
Do not touch the radiator or coolant during
engine operation or right after the engine has
been turned off.
Otherwise, you may get burned due to high
temperatures.
Caution
Inspection should take place after the engine
has well cooled down.
Make sure that the coolant level in the reserve
tank is between "FULL" and "LOW."
When the coolant level is lower than the
"LOW" mark, fill the tank with clean water.
1
A
B
7CC26794
Inspection of Coolant_001
1 Reserve tank
2 FULL
3 LOW
10.
1.
2.
3.
Inspection of Air Cleaner
Make sure that there is no damage to the
air cleaner.
Make sure that the air cleaner element is
not contaminated.
4
3
2
1
6F59690C
Inspection of Air Cleaner_001
1 Air cleaner element
2 Clip
3 Air cleaner cap
4 Air cleaner body
Inspection of Radiator Cover
Make sure that there is no damage to the
radiator cover.
Make sure that the radiator cover is not
contaminated.
Inspection of Radiator
Make sure that there is no damage to the
radiator.
Make sure that the radiator is not
contaminated.
Inspection of Engine-Associated Parts
Caution
Perform operations after the engine and other
parts have sufficiently cooled.
Otherwise, you may suffer burns.
Check for damages and dirt.
Check the mount for looseness and cracks.
Check for liquid leakage.
Check on and around the muffler for grass
clippings and flammable materials.
1.
2.
1.
2.
1.
2.
1.
2.
3.
4.
LM351
Handling Instructions
Page 5-6
Inspection Before Use