Baroness LM351, Руководство по эксплуатации для владельца

Страница: 58 / 75

Move the throttle lever halfway from the
"Low speed" position toward the "High
speed" position.
Important
The thermo-start lamp turns off at the
specified time. However, the lamp turning off
is not related to the glow plug generating heat.
If the ignition key is left in the "GLOW"
position after the lamp is turned off, the plug
will still generate heat.
The thermo-start lamp will stay illuminated for
5 seconds.
Switch the ignition key to the "GLOW"
position.
1
A
B
C
D
v2e27i-010
Procedure to Start Engine_003
1 Ignition key
A OFF
B ON
C GLOW
D START
Make sure that the glow plug is generating
heat and the thermo-start lamp is turned on.
1
q44uug-002
Procedure to Start Engine_004
1 Thermo-start lamp
8.
9.
10.
After the thermo-start lamp turns off,
immediately set the ignition key to the
"START" position.
Important
Quickly returning the ignition key from the
"START" position to the "ON" position may
result in damage to the machine.
When the starter starts rotating and the
engine starts, return the ignition key to the
"ON" position slowly.
Make sure that the charge lamp and oil
pressure lamp turn off.
If they do not turn off, stop the engine and
inspect the machine.
1 2
v2e27i-017
Procedure to Start Engine_005
1 Charge lamp
2 Oil pressure lamp
Move the throttle lever to the "Low speed"
position, and then warm up the engine so
that the needle points above "C" on the
water temperature gauge.
1
igozke-001
Procedure to Start Engine_006
1 Water temperature gauge
11.
12.
13.
14.
LM351
Handling Instructions
Page 5-12
Start/Stop of Engine