Baroness LM281, Руководство по эксплуатации для владельца

Страница: 69 / 92

Front roller
Note:
Depending on the specifications, this
function may not be available.
There is one greasing point each on the left
and right sides of the front roller of each
mower unit.
8bq62b-072
Greasing Points_002
Rear roller
There is one greasing point each on the left
and right sides of the rear roller of each
mower unit.
8bq62b-040
Greasing Points_003
Housing
There is one greasing point each on the left
and right housings of each mower unit.
Hydraulic motor housing
(#10196-)
8bq62b-282
Greasing Points_004
1.
2.
3.
Important
Always use a hand operated grease gun and
only add a maximum of 2 pumps of grease
every 50 hours.
Using a power assisted grease gun should be
avoided.
The grease capacity inside the reel housing
on the CR brush mount side is approximately
25 g (0.05 lb).
If you repeat greasing by 2 g (0.004 lb) twelve
times for 600 hours of operation, the grease
amount inside the housing will almost reach
its full capacity.
In case that the grease exceeds its capacity,
the brush frame may project outward.
Therefore, remove the brush frame and
discard the grease inside the reel housing
when it reaches the capacity.
Reel housing
8bq62b-283
Greasing Points_005
Mower frame fulcrum
There is one greasing point on the mower
frame fulcrum of each mower unit.
8bq62b-074
Greasing Points_006
4.
Maintenance
LM281
Maintenance
Page 5-7
Greasing