Baroness LM281, Руководство по эксплуатации для владельца

Страница: 38 / 92

Supply of Battery Fluid
Danger Danger
Be careful not to let your skin, eyes or clothes,
etc., come into contact with the battery fluid or
accidentally swallow the fluid.
Should your skin or clothes come into contact
with the battery fluid, immediately wash them
away with water.
Danger Danger
When you supply battery fluid, wear protective
garments and safety glasses, etc.
Caution
Implement after the engine and muffler etc.
have well cooled down.
Otherwise you may get burned.
If the battery fluid level is lower than
halfway between the UPPER LEVEL
(maximum) line and LOWER LEVEL
(minimum) line, add purified water up to the
UPPER LEVEL (maximum) line.
U P P E R L E V E L
L O W E R L E V E L
1
2
48yhlu-006
Supply of Battery Fluid_001
1 UPPER LEVEL
2 LOWER LEVEL
Tire
Inspection of Tires
Caution
Do not allow the air pressure in the tires to
exceed the specified maximum.
Check the pneumatic pressure of the tires.
Make sure that there are no cracks,
damage or abnormal wear on the tires.
1.
1.
2.
Tire size Pneumatic pressure
Front wheel (23 x 10.50 -
12 4P)
120 kPa (1.2 kgf/cm
2
)
Rear wheel (23 x 8.50 - 12
4P)
150 kPa (1.5 kgf/cm
2
)
Brake
Inspection of Brake
While traveling, depress the brake pedal
firmly to make sure that the brake is applied
effectively.
Inspection of Parking Brake
Make sure that the brake is applied when
you pull the parking brake lever.
Make sure that the brake is not applied
even slightly when you press the push
button to release the parking brake lever.
Belt
Inspection of Belt
Warning
The engine must be stopped when the belt is
inspected.
Important
A slacking or damaged belt or damaged fan
may cause overheating or lack of a battery
charge.
Press the middle of the belt with your finger
to check the belt tension.
Make sure that there are no cracks,
damage or abnormal wear.
Wire
Inspection of Wire
Make sure that the wire is not cracked or
damaged.
If the wire is cracked or damaged, replace it
with a new one immediately.
1.
2.
1.
2.
1.
2.
LM281
Handling Instructions
Page 4-8
Inspections