Baroness LM281, Руководство по эксплуатации для владельца

Страница: 39 / 92

Around The Engine
Inspection of Engine-Associated Parts
Check the fuel system parts for loosened or
cracked joints and leakage. Replace the
parts if necessary.
Blow compressed air to clean any grass or
flammable materials that may be attached
on or around the muffler.
Engine Oil
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, then check the
oil level.
Position the machine so that the engine will
be level, then insert the oil gauge all the
way to check the oil level.
1
bgmiun-012
Inspection of Engine Oil_001
1 Oil gauge
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2 3
1
rnr453-004
Inspection of Engine Oil_002
1.
2.
1.
2.
3.
1 Oil gauge
2 Upper limit
3 Lower limit
Supply of Engine Oil
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Engine oil is supplied through the oil filling
port.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Securely install the oil filler cap.
1
kx9ti-005
Supply of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
1.
2.
3.
Handling Instructions
LM281
Handling Instructions
Page 4-9
Inspections