Baroness GM2800A, Руководство по эксплуатации для владельца, Страница: 27 / 90

- 24 -
Mowing operation
5-2
1) Pull up the throttle lever and set engine speed to MAX (2,600rpm). (Refer to )
2) Release the mower lock lever. (Refer to )
3) Move the mower unit raise/lower lever to the "DOWN" position, and lower the mower
deck. (Refer to )
4) Turn the blade rotation switch to the "ON" position, and rotate the blade.
(Refer to )
5) Hold the forward pedal down and begin the operation.
*
Respond to the raising or lowering of the mower unit, the blade will rotate or stop
automatically.
3-13
3-17
3-19
3-16
●
Be sure to work by the speed which suited the working
condition.
● The machine detects the position of the mower unit and decides
"whether to rotate or stop" the blade. Keep in mind that the
blade rotation may not stop if the mower unit is not fully raised
by operating the mower unit raise/lower lever.
Caution
6. Maintenance of the main unit
1) Change the oil after the first 50 hours
operation, and change it for every 100
hours operation from the next.
2) Remove drain plug on the oil pan. If it
carries out while the engine is warm, the
oil can be drained completely.
Change of engine oil 6-1
Drain plug
Refer to the engine's instruction manual for handling of the engine.
● Use the engine oil higher than the API service classification CD
class.
● The engine oil is high temperature immediately after the
operation. Change it after waiting for a while so that you may
not be burned, when removing the drain plug.
Caution
Change of hydraulic oil 6-2
1) Change the hydraulic oil after the first
100-hour operation, and change it in the
shorter period between the one year and
500-hours operation from the next.
2) Always replace the hydraulic filter when
changing oil.
3) Remove the drain plug on the bottom of
the hydraulic oil tank, and drain the
hydraulic oil.
Filter Hydraulic oil tank Drain plug