Baroness GM2800A, Руководство по эксплуатации для владельца, Страница: 23 / 90

- 20 -
2WD - 4WD changeover switch
3-14
The 2WD-4WD changeover switch is in the
operation panel. When the switch is turned to
"2WD", it will become two-wheel drive (front
wheel drive), and when it is turned to "4WD",
it will become four-wheel drive.
*
When the blade rotation switch is "ON",
regardless of 2WD-4WD changeover
switch, it becomes "4WD".
2WD - 4WD changeover switch
4WD 2WD
● Be sure to use 4WD in a sloping ground.
● When moving, suspend the rotation of the blade, and raise the
mower unit.
● Operate the machine in consideration of the state of the roads
and the ground, such as the slant and the undulation.
Caution
Headlight switch
3-15
When the switch is turned to "ON", the
headlight will light up, and the light will be put
out when it is turned to "OFF".
Headlight switch
Lighting
Turn off
● The headlight is auxiliary light. Do not travel or operate when
the visibility is not good or in nighttime.
Warning
Throttle lever
3-16
If the throttle lever is pulling up to the top
(HIGH), the engine speed becomes high, and
if the throttle lever is lowering to the bottom
(LOW), the engine speed becomes low.
*1 Factory setting of the maximum engine
rpm is 2,600 rpm.
HIGH
LOW
Throttle lever
Mower unit raise/lower lever 3-17
The lever returns to the neutral position.
When it moves to "DOWN", the deck will be
lowered, and if it moves to "UP", the deck will
be raised.
If the deck is raised even if the blade rotation
switch is in the "ON" position, rotation of the
blade will stop.
● Inspect the area where the machine will be used.
Caution
DOWN
(Work)
Neutral
UP
Mower unit raise/lower lever